Fast, accurate
pressure measurements at moderate cost. Combines
modern, solid state integrated circuit electronics with
the time proven point gage manometer. Delivers repeatable
accuracy in measuring positive, negative or differential
pressures to ±.00025" water column over a 0 to 2" w.c. range.
Metric model M1430 reads from 0-50 mm w.c. Calibrates other
instruments. Provides high precision for test laboratories
of manufacturers of fans, air conditioning and heating equipment,
pneumatic or fluidic controls, etc. Used in college, university
and consultant laboratories — wherever precision measurements
are required. Used with pitot tube (at extra cost) for precision
measurement of low air velocities. Measures positive, negative
or differential pressures to 2.0" w.c. Easy to maintain
and clean. Battery replacement and instrument cleaning are
quick and simple-use mild soap and water. Indicating fluid
consists of distilled water and a small amount of Dwyer®
A-126 Fluorescein green color concentrate. Max. press. 100
psig (6.89 bar).
Microtector®
gage kit includes everything needed:
Microtector® Gage – A Durablock® solid, precision
machined acrylic plastic body, mounted on heavy, 1/2" thick
steel base, 3-point base mounting has two leveling screws
and level vial for quick setup.
Gage Meter – Sensitive 0-50 microamp D.C. meter acts
as detector. Powered by 1-1/2 volt penlight cell (included).
No external power needed. Meter also indicates battery and
hook probe condition.
Electronic Circuitry – Solid state integrated circuit
electronic components are mounted on glass epoxy board enclosed
in a molded styrene acrylonitrile compartment for protection.
A.C. Detector current eliminates hook plating.
Micrometer – Adjusts point with precision. Complies
with Federal Specification GGG-C-105C and is traceable to
a master at the NIST.
Dwyer® Gage Fluid - 3/4 oz. Non-toxic concentrate
of fluorescein green color, wetting agent and distilled
water. Use with distilled water.
Accessories – Two 3-foot lengths of tygon tubing,
two 1/8" pipe thread adapters, micrometer wrench and crocus
cloth for cleaning point.
Carrying Case-Cover – Rugged sheet steel, gray finish.
Carrying handle and latches. Complete instructions included.
|
