Quick and
Easy-to-Use Dwyer® Combustion Test Kit measures
all four factors that govern overall efficiency: CO2, content, draft, stack temperature and smoke. Accuracy
to ±1/2% CO2 fully meets the requirements
of the professional Heating Engineer. Yet an apprentice
can follow the simple, illustrated step-the-step instructions.
Add a small Pitot tube, which will fit into the kit case
for air velocity measurements.
No. 1200-A Combustion
Test Kit
- New easy-to-carry, impact resistant polyethylene carrying
case with handle.
- No. 1101 CO2 Indicator - Clear
acrylic plastic, virtually unbreakable.
- Aspirator Bulb, Filter and Tubing Assembly.
- Filter Wool - extra supply in bag for about 1000 tests.
- No. 171 Draft Gages - continuously indicating.
- Dwyer® Smoke Gage Pump - fast-working, this first
known unit to conform with ASTM D-2156-XX standards
for testing smoke density in flue gases.
- Smoke Filter Paper - An exclusive Dwyer development.
- Magnehelic® Gage - 0.25" w.c. and 300 to 2000 FPM.
Included in Model 1200-B kit below.
- Awl - pierces smoke pipe for thermometer and sampling
tubes.
- CO2 Absorbent Solution - extra
supply for many tests.
- No. A-503 Stack Thermometer - dial type, stainless
steel 200 to 1000°F.
- Gage Oil - long-lasting extra supply.
- Spring Holders - for thermometer and terminal tubes.
- Hole Plugs - packet to fill awl holes.
- Smoke Chart - laminated plastic for comparison with
samples taken.
- Dwyer® Combustion Efficiency Slide Rule Computer -
simple to operate.
- Operating Instructions - simple, illustrated. Show
step-by-step use.
- Combustion Data Cards and Parts List - plastic, weighs
only 6 lb 8 oz.
No. 1200-B Combustion
Test Kit Includes portable Dwyer® Magnehelic®
Draft Gage with large 4" dial instead of No. 171 Inclined
Draft Gage, 0 to .25" w.c. range in .01" divisions. Also
has air velocity scale with 300 to 2000 FPM range. No leveling
necessary; no gage oil required. Kit is otherwise identical
to No. 1200-A and weighs only 7 lb 5 oz.
|