The Series 1400 Temperature Controller is a reliable, accurate and ultra-low cost analog control or alarm in a compact 1/16 DIN case. LED status and deviation indication, analog setpoint indicator and dual °F/°C scale are standard features. Inputs include J and K type thermocouples or RTDs. Alarm output is field configurable reverse acting (heating) or direct acting (cooling) and is easily adjusted for either automatic or manual reset to provide independent high or low system protection. Electronics are easily replaceable via removable front panel (just pull out - no wiring changes). Front panel meets NEMA-2 and NEMA-12.

APPLICATIONS
Plastics extrusion; injection, compounding, screening, or thermoforming machinery; package sealing equipment; industrial bonding, paint application, glass manufacturing, heat treating; laboratory ovens and environmental chambers; food preparation equipment; valves, motors, HVAC, chillers, incinerators.

SPECIFICATIONS
Inputs: Type J and K thermocouple or RTD.
Accuracy: ±2% full scale.
Supply Voltage: 100 to 240 VAC, 50-400 Hz.
Operating Temperature: 14 to 130°F (-10 to 55°C); storage -13 to 149°F (-25 to 65°C).
Output Ratings: Relay (SPST): 3 A res., 1.5 A ind. @ 250 VAC; Pilot Duty = 250 VA, 2 A @ 125 VAC or 1 A @ 250 VAC. Logic (non-isolated): 5 VDC @ 25 mA max. Recorder: 0-1 VDC @ 0-1 mA.
Deviation Indicator: LEDs indicate process value deviation from setpoint of greater than 1.5% full scale.
Input Impedance: Thermocouple (3 megohms min.) RTD current (500 µA max.).
Weight: 8 oz (227 g).

OPTIONS -- Consult Factory for Pricing

210 Setpoint Knob Lock. Not available with Aux. Alarm.
215 Alarm Power Interrupt (automatic reset on power on).
2102 FM Approved Setpoint Knob Lock. Not available with Aux. Alarm.