The Series 2200 Current to Pressure Transducer combines low cost, accuracy and minimal air consumption with field-proven technology. Versatile design features a rugged, compact housing with a choice of CSA and FM approved explosion-proof or intrinsically safe operation when used with a suitable barrier. The unit features easy access to zero and span adjustments, plus controls for field selectable direct, reverse or split-range operation.

SPECIFICATIONS
Input Signal: 4-20 mA, 2-wire.
Air Supply: 20 (±2) psig for 3-15 psig; 1.4 (±0.14) kg/cm² for 0.21-1.1 kg/cm² output. 35 (±2) psig for 6-30 psig: 2.5 (±0.14) kg/cm² for 0.42-2.1 kg/cm² output.
Output: 3-15 psig (.21-1.1 kg/cm²), 6-30 psig (.42-2.1 kg/cm²).
Accuracy: ±0.15% of span (3-15 psig, 0.21-1.1 kg/cm²) ±0.25% of span (6-30 psig, 0.42-2.1 kg/cm²).
Repeatability: 0.05% of span.
Deadband: 0.02% of span.
Stability: 0.5% of span/6 months.
Power Requirement: 8-40 VDC. Loop powered. Internal resistance is 1000 ohms at 4 mA and 200 ohms at 20 mA.
Operating Current: 3.7 mA minimum, 200 mA maximum.
Temperature Limits: -20 to 150°F (-29 to 66°C).
Connection: 1/4" female NPT supply port (1) and 1/4" female NPT output port (2). 1/2" female NPT electrical conduit connection.
Air Consumption: 0.04 scfm (.02 l/s) steady state average; 0.06 scfm (.03 l/s) maximum.
Output Capacity: 4.0 scfm (1.9 l/s).
Failure Mode: Transducer always fails in the direct mode.
Enclosure: Internally purged NEMA 4X cast/machined aluminum with powder coat epoxy.
Weight: 2.5 lb (1.13 kg).
Agency Approvals: CE, CSA, FM.

OPTIONS -- Consult Factory for Pricing

Valve Mount: For factory mounting and calibration to Hi-Flow™ control valves, add Current-to-Pressure Transducer model number as suffix. Example: 2004VA32-223-2213-0 -- Consult Factory for Pricing.

ACCESSORIES -- See "Ordering" Page

A-621 -- Valve Mounting Kit. If field mounting to Hi-Flow™ Valve, special adapter plate may be required. Consult factory for necessary components and details.

A-620 -- Pipe Mounting Kit.