Series 477 Handheld Digital Manometers are packed with features you need to make low pressure measurement and recording faster, easier and more accurate than ever. First, you can instantly select from up to nine of the most widely used pressure units without having to waste time and risk mistakes with tedious conversions. Next, a non-volatile memory function enables storage of up to 20 readings - perfect for HVAC technicians making Pitot tube traverses of airflow readings across a duct. The Series 477 is FM approved intrinsically safe for hazardous locations, Class 1, Div. 1, Group A, B, C, D, T4.

When working in poorly lighted areas, just switch on the handy backlight feature. It automatically shuts itself off after 20 minutes to minimize battery drain. Electronic zeroing means you simply touch a single key to perfectly null out any minor pressure differences. A display HOLD key freezes the current pressure for those all-too-common situations where readings fluctuate. We even included an audible alarm to warn you of overpressure plus a visual alarm also confirms a value has been stored, eliminating the need to observe display during a duct traverse.

Clear, concise operating instructions for all functions are printed on the rear of the rugged extruded aluminum case for quick reference. One-piece front membrane fully protects all keys from dust and moisture, wipes clean in seconds. Detailed written instructions, wrist strap and 9 volt alkaline battery are included.

SPECIFICATIONS
Service: Air and compatible gases.
Wetted Materials: Consult Factory.
Accuracy: ±0.5% F.S., 60 to 78°F (15.6 to 25.6°C); ±1.5% F.S. from 32 to 60°F and 78 to 104°F (0 to 15.6°C and 25.6 to 40°C).
Pressure Hysteresis: ±0.1% of full scale.
Pressure Limits: See chart on "Ordering" page.
Temperature Limits: 0 to 140°F (-17.8 to 60°C).
Compensated Temperature Limits: 32 to 104°F (-0 to 40°C).
Storage Temperature Limits: -4 to 176°F (-20 to 80°C).
Display: 0.42" (10.6 mm) 4-1/2" digit liquid crystal.
Resolution: See chart on "Ordering" page.
Power Requirements: 9 volt alkaline battery. Battery included but not connected.
Weight: 10.2 oz (289 g).
Connections: Two barbed connections for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) I.D. tubing. Two compression fittings for use with 1/8" (3.18 mm) I.D. x 1/4" (6.35 mm) O.D. tubing for 477-6-FM & 477-7-FM only.
Agency Approvals: FM, CE.

PRESSURE UNITS AVAILABLE

Model Number	psid	in. H20	mm H20	in. Hg	mm Hg	Pa	kPa	bar	mbar
477-1-FM
477-2-FM
477-3-FM
477-4-FM
477-5-FM
477-6-FM
477-7-FM

FEATURES