Replace traditional contact temperature probes with Series IL In-Line IR Sensors. These compact, low cost sensors utilize infrared technology to take non-contact temperature readings between 32 and 662°F (0 to 350°C). The onboard electronics are protected by a rugged NEMA 4 (IP65) stainless steel housing. Select between a J-Type thermocouple or a 0-5 volt linear output for connection to a controller, display or transmitter. Includes two mounting nuts.


SPECIFICATIONS
Temperature Range: 32 to 662°F (0 to 350°C). Thermocouple: 86 to 932°F (30 to 500°C) linear voltage.
Accuracy: ±2% of reading or ±6°F (±3°C) whichever is greater for 32 to 240°F (0 to 115°C); ±5% of reading or ±10°F (±6°C) whichever is greater for 24 to 440°F (116 to 225°C); >±5% of reading for 44 to 662°F (226 to 350°C).
Emissivity: 0.95 fixed.
Distance-to-Target Size Ratio: 4:1.
Ratio: 4:1.
Resolution: 1°F (0.5°C).
Response Time: 350 ms.
Ambient Operating Temperature: 32 to 160°F (0 to 70°C).
Power Requirements: 12-24 VDC.
Repeatability: ±1% of reading or ±2°F (±1°C) whichever is greater.
Storage Temperature: -22 to 185°F (-30 to 85°C).
Outputs: J-thermocouple or 0-5 volt.
Cable Length: 3 ft (0.9 m).
Spectral Response:7 to 18 microns.
Housing: NEMA 4 (IP65), stainless steel.
Weight: 4.5 oz (130 g).
Agency Approvals: CE.


ACCESSORIES -- See "Ordering" Page
XXXCIACMN Mounting Nuts (2 pieces).
XXXCIACFB Fixed Mounting Bracket.
XXXCIADJB Adjustable Mounting Bracket.
XXXCIDCPS 24VDC Power Supply.