The Iso
Verter® II Isolator/Converter protects electronic
circuits by completely isolating the input and output signals
from each other and from ground. Both input and output ranges
are fully field selectable with easy to adjust switches.
With bipolar input selection and zero suppression, nearly
any standard input/output range combination is possible.
Zero and span adjustments are easily accessible on top of
housing. Units plug into universally available octal sockets
for quick easy installation. Industry standard "pin-out"
wiring configuration allows direct replacement of most competitive
models. Order optional 481-0159 socket for new installations.
SPECIFICATIONS
Isolation: 1500 VAC.
Linearity: 0.1% of full span.
Drift: ±0.02%/°C typical; ±0.05%°C maximum.
Ambient Operating Temperature: 32 to 131°F (0 to
55°C).
Output Loads: Current: 600 ohms maximum; Voltage:
500 ohms minimum (20 mA maximum).
Input Impedance: Current: 10 ohms; Voltage: 1 megohm.
Power Supply: 85-265 VDC/VAC, 50-400 Hz.
Case Size (including socket pins): 2-3/8" W x 3-7/16"
H x 1-3/4" D (60.3 x 87.3 x 44.4 mm); Height is 2-7/8" (73
mm) above socket.
Mounting: Industry standard octal socket.
RANGES
AVAILABLE (Field Selectable)
| Inputs |
Outputs |
| Current |
Voltage |
Current |
Voltage |
0-5 mA
0-10 mA
0-20 mA
0-50 mA
|
0-100 mA
1-5 mA
4-20 mA
10-50 mA
|
0-100 mV
0-200 mV
0-500 mV
0-1 V
|
0-5 V
0-10 V
1-5 V
2-10 V
|
0-1 mA
0-5 mA
0-20 mA
1-5 mA
4-20 mA
|
0-1 V
0-5 V
0-10 V
1-5 V
2-10 V |
|
