The Series TSD is designed for applications requiring heating or cooling regulation. The unit includes two probes for temperature regulating and defrost control, an 8 (3) A SPDT relay output, alarm output and digital input.

The temperature switch features up to 48 programmable parameters. The user can define operational parameters such as set point, differential hysteresis, time delay, and cycle time via the 3-key tactile keypad. To simplify the programming task, 18 preset configurations can be activated by changing a single parameter. Access to all parameters, except the set point, is password protected.

The unit features local indication of the relay output and defrost status. View ambient or defrosting probe temperature on the bright red LED display. Error and alarm messages can be viewed on the display.

The Series TSD includes two probes, gasket, panel clip, snap-on terminal cover and instruction manual.


SPECIFICATIONS
Probe Range: -58 to 302°F (-50 to 150°C).
Input: Two 1.5-inch (4 cm) thermistor (1000 @ 25°C) with 5-foot (1.5 m) cable.
Output:One 8 amp SPDT relay @ 250 VAC, resistive; alarm 20 mA @ 12 VDC.
Horsepower Rating (HP): 1/3 HP for 8 amp.
Control Type: On/Off.
Power Requirements: 110 VAC or 230 VAC, depending on model.
Accuracy: ±0.5% of probe ranges.
Display: 3-Digit, red.
Resolution: 1°.
Ambient Operating Temperature: 32 to 158°F (0 to 70°C).
Storage Temperature: -4 to 176°F (-20 to 80°C).
Weight: 6.2 oz (65 g).
Front Panel Protection: NEMA 4 (IP65).
Agency Approvals: CE, UR, URc.


ACCESSORIES -- See "Ordering" Page
TS-5 PVC Probe, 5 ft (1.5 m) cable
TS-51 PVC Probe, 10 ft (3 m) cable
TS-6 Metal Probe, 5 ft (1.5 m) cable
TS-61 Metal Probe, 10 ft (3 m) cable