Series GFT Flow Totalizer is designed to be used with mass flowmeters and mass flow controllers. The totalizer accepts analog output flow signals of either 0 to 5 VDC or 5 to 10 VDC. Series GFT integrates and accumulates up to 7 digits of direct engineering units for a given gas and flow rate (standard liters, standard cubic centimeters, etc.). Quickly connect the GFT-10 to Series GFC and GFM mass flow controllers and meters via the modular jack (replacing the LCD display) or use the GFT-10C cable to connect in parallel with the display.

SPECIFICATIONS
Input Analog Range: 0 to 5 or 5 to 10 VDC.
Power Consumption: 10 mA @ 12 VDC, less than 0.125 Watts.
Accuracy: ±0.5% FS.
Temperature Stability: ±100 ppm/°C in the range of 5 to 50°C.
Reset: Momentary tact switch.
Display: 7-digit, 5/16" (8 mm) H.
Power Supply: Internal lithium battery.
Agency Approvals: CE.

ACCESSORIES - See "Ordering" Page

GFT-05C - Cable for 0 to 5 VDC Models
GFT-10C - Cable for 0 to 10 VDC Models