SBLT Submersible Level Transmitter is manufactured for years of trouble free service. The transmitter consists of a bonded foil, strain gauge, sensing element, encased in 316 SS housing. Superior lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients. Bullet nose design protects diaphragm from damage. Comes equipped with a 220-pound tensile strength, shielded, vented, Polyurethane cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating moisture collection in the transducer. The vent filter is a much superior design to transmitters with desiccant tubes that need to be replaced and bladder bags that can throw off readings and add extra cost.

APPLICATIONS
Well monitoring; Ground water monitoring; Environmental remediation; Surface water monitoring; Down hole; Water Tanks.

SPECIFICATIONS
Service: Compatible liquids.
Wetted Materials: Body: 316 SS, Cable: Polyurethane, Bullet Nose: PVC.
Accuracy: ±0.20% of full scale.
Temperature Limits: -40 to 150°F (-40 to 65.6°C).
Compensated Temperature Range: 0 to 140°F (-17.8 to 60°C).
Pressure Limit: 1.5X full scale range.
Thermal Effect: Less than ±2.0% full scale per 100°F.
Power Requirement: 9 to 36 VDC.
Output Signal: 4 to 20 mA DC, 2-wire.
Response Time: <5 ms.
Loop Resistance: 750 ohms at 24 VDC.
Electrical Connections: Wire pigtail.
Mounting Orientation: Suspended in tank below level being measured. Can be placed on the bottom of the tank on its side.
Standard Features: Calibration certificate.
Weight: 3.5 lb (1.59 kg).
Electrical Protection: Dual transient lightning and surge arrestors exceeding FM approved I/S and meet EMA/RFI standards Mil-Std 461/462 and ground to transducer case.